Suzuki Volusia Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
ok so I am new here and looked for a thread that may help but couldn't find anything
I have an 08 c50 and was changing out the steering stem bearings with the all balls kit ab221004 but it does not look right it sticks up about 1/4 inch taller than stock bearings has anyone done this conversion or just use stock Suzuki bearings?
144403
 

·
Registered
Joined
·
19,430 Posts
Just use the stock bearings. The aftermarket support for these bikes is spotty at best. Some stuff can be 'coaxed' into place. Stuff like this isn't worth the aggravation.
 
1 - 2 of 2 Posts
Top