[Cruzito187]

Im installing my lowering kit on my m50. I cant pull out the lower bolt cause it touches the frame. I dont lnow what to do. Maybe i should remove one of the bolts that holds the shock but ill wait to someone to comfirm


Sent from Motorcycle.com Free App

 

[OzriderC50T]

There are 3 bolts that hold the assembly on, if you are using a bike jack, take them all out. At the very least the rear one as it will let the assembly drop down.

 

[rgiess]

There is a bushing that the bolt slides in. Pull the bushing out the other way and the bolt will be able to tilt enough to clear the frame.

 

[mtmous]

There is a bushing that the bolt slides in. Pull the bushing out the other way and the bolt will be able to tilt enough to clear the frame.

yes, what he said.

 

[Cruzito187]

There is a bushing that the bolt slides in. Pull the bushing out the other way and the bolt will be able to tilt enough to clear the frame.

Thx


Sent from Motorcycle.com Free App

 

[Jeffrobombero]

Moved this thread to the HELP forum.

 

[03volusiarider]

I just removed the front shock pivot bolt.

 

[rgiess]

Try removing that bushing. It work fine to get the lower bolt out.