Suzuki Volusia Forum banner

Jardine Tapers "UPDATE" rejet DONE Pics in Galler

1K views 4 replies 4 participants last post by  sanos 
#1 ·
Anyone out there running Jardine taper or slashcut pipes care to share what jet sizes youre using?

Thanks
Dave
 
#2 ·
I have the Jardine tapers and use a DJ160 main.
 
#3 ·
Installed the MCcarbs.com jet kit today and she runs great! Not one problem thanks to all the great info found on here!
I used a 152.5 main and 35 pilot with one extra shim on the needle valve.
The only pain in the butt was putting the needle valve assembly back together with that spring and rubber diaphram.
While I was at it I done away with the football, installed a UNI and took off the pair valve. All I need now is some bolts to fill those holes in the jugs.
I must say I love the nekkid jug look!
I'll post some pics as soon as I can get some time to do so.

Dave
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top