Suzuki Volusia Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I had just picked up the T20 security torx bit, i like other riders had only a single key for my volusia vl 800.there was no key code and i even contacted suzuki but they do not give the key codes out....I found the keys models i need and are having them currently shipped to me,,,my question is what with limited access to the torx bolts(i have both the 1/4 and 3/8 swivel adapters) but still no room to get the bit on properly especially the lower bolt, any suggestions would be appreciated

147104
147105
 

·
Registered
Joined
·
262 Posts
I’ve never had a reason to remove mine but I’m wondering if you put the T20 security bit in a 1/4” socket so that the socket acts like the bit holder and slide it in there....
Another thought is using a 1/4” box end wrench to hold the security bit with a piece of duct tape on the bottom to keep the bit in place then slide the wrench in to access the screws.....
Hope it helps.
 
1 - 2 of 2 Posts
Top