Suzuki Volusia Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
My C50 just about dies after it leaves fast idle on start ups and thereafter. I see the screws for such are under the left side of the gas tank and that there's a big screw and a smaller one right above it. Which governs idle speed? I take it the other one is fast idle.
 

·
Registered
Joined
·
45 Posts
Discussion Starter #2
I used the Search device to try and answer my question and didn't receive much in the line of a good answer. I tried turning the screws but that didn't change much. Would someone with a service manual mind looking it up for me?
 

·
Registered
Joined
·
272 Posts
Don't know what year your bike is but I think the first pic is before '05 and the second pic is '05 and beyond
Says to adjust after the bike is warmed up, 1100 rpm plus or minus 100
Highly recommend buying a manual. I always save way more than the small investment.
 

Attachments

·
Registered
Joined
·
45 Posts
Discussion Starter #4
Thanks. I have an 2007 and the second picture is the one for my bike. I did turn that one but I didn't let it warm up first which is probably my problem. Thanks again for the info.
 
1 - 5 of 5 Posts
Top