Suzuki Volusia Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi everyone

Im customizing a suzuki volusia 800cc 2004 and changed the lights back to the brake, position light and turnsignal for a kellerman led 3 in one
And front i mounted 2 led insted off the turn signals.
I also added a led relay so the frequence is right but the problem is that its blinking all the time both front and back now.
Doesnt matter if i turn on the turnsignals or not
Anyone had this problem?
Can it be in the a broken handle switch perhaps?
Im running out of ideas here

AND
im looking for a electrical schematics for this bike if anyone has it?

Thanks a million
//Mårten
 

·
Super Moderator
Joined
·
3,197 Posts
Welcome to the VR Forums.

Congratulations on all the modifications you are doing.

Here is an online manual for your bike. The wiring diagrams begin on page 10 of section 9 - service information.

Volusia Service Book
 

·
Registered
Joined
·
82 Posts
hi everyone

Im customizing a suzuki volusia 800cc 2004 and changed the lights back to the brake, position light and turnsignal for a kellerman led 3 in one
And front i mounted 2 led insted off the turn signals.
I also added a led relay so the frequence is right but the problem is that its blinking all the time both front and back now.
Doesnt matter if i turn on the turnsignals or not
Anyone had this problem?
Can it be in the a broken handle switch perhaps?
Im running out of ideas here

AND
im looking for a electrical schematics for this bike if anyone has it?

Thanks a million
//Mårten
Not sure what a LED relay is, or how you wired it up. Are all four turn signals flashing? Have you mistaken running lights wire for turn signal wire?
 

·
Super Moderator
Joined
·
4,310 Posts
First post needs a hearty welcome...Hearty Welcome...Ride safe and enjoy!
 
1 - 6 of 6 Posts
Top