[GeorgeF]

Doing the DJ Mod on an 06 C50. I read the instructions several times but I have a question if anyone knows please.

I'm going to modify my current C50 drive shaft. Once the 3/16 is trimmed from the end, does it need to be rounded slightly like the original? See pic attached.

Also, I live in Western PA. I can cold call a machine shop I guess, but is there anyone around my area that has a recommendation for this, or is there someone I can send it to for machining that knows the deal?

Thanks

 

[GeorgeF]

Yeah, I know the shoulder needs shaved back 3/16 also. I don't have any questions about that.

But when the end gets trimmed off 3/16, the end of the shaft will be flat across. Do the edges need to be rounded off a bit like the original pic I posted? That's my question.

 

[GeorgeF]

Good to know, thanks!

After I add the what? You lost me there. Maybe a typo? Chamfer?

 

[GeorgeF]

Okay, so I learned a new word, thank you!

So who adds the chamfered edge? The machine shop when they trim off the edge? Or me after I get it back with a file or something?

This wasn't mentioned in the DJ Mod instructions.