Suzuki Volusia Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Here is the start of my custom rear bobber fender. Cut from a Russ Wernimont Designs 9" strutted rear fender. The fender can still take the pillion seat.

Will be painted satin black, the same as the rear sub frame. The bike has also been lowered 3" to help the look.
 

Attachments

·
Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
Going to turn the dampening from 3 to 5 or 6 in the hope that it will limit scraping on the fender. As for the bottom of the frame. It might meet the tarmac a few times. The pipes have more than enough clearance.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #9 ·
There are two small sections of fender which I have left under the rear sub frame to mount the rear turn signals which will only stick out 27mm. As for the licence plate I've got a side mount plate bracket with integrated rear/brake light so I can leave the rear fender blank.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top