Suzuki Volusia Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
243 Posts
Discussion Starter · #1 ·
Is there any where I can get a cam chain master link....... Or any ideas ,, I put the chains on wrong .... Long is on the back and vise versa on front and I need to swap'em around



'02 volusia broken motor on the way to recovery!

Remember THEY are all out to get ya, so be safe and dodge all the IDIOTS !!!
 

·
Registered
Joined
·
243 Posts
Discussion Starter · #2 ·
Anyone? I'm desperate , I'm having ride withdraws from not riding since October!!!!!!!


'02 volusia broken motor on the way to recovery!

Remember THEY are all out to get ya, so be safe and dodge all the IDIOTS !!!
 

·
Premium Member
Joined
·
3,197 Posts
Anyone? I'm desperate , I'm having ride withdraws from not riding since October!!!!!!!


'02 volusia broken motor on the way to recovery!

Remember THEY are all out to get ya, so be safe and dodge all the IDIOTS !!!
I don't know of any ''master link" for a multi link chain like is used on these engines.

Even if there were, I wouldn't recommend their use in this application because a master link will wear faster than the rest of the links and accelerate the wear on links for a distance on either side of it.

You are better off to bite the bullet and back up to step one of the reassembly with the chains in the correct position..... sorry for the bad news......:crying:
 
  • Like
Reactions: rvcycleguy

·
Registered
Joined
·
243 Posts
Discussion Starter · #4 ·
I was afraid of that


'02 volusia broken motor on the way to recovery!

Remember THEY are all out to get ya, so be safe and dodge all the IDIOTS !!!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top