Senior VR Member
Join Date: Jul 2008
Location: Athens, GA
Thanked 554 Times in 418 Posts
For anyone doing this mod....here is a tip.
When cutting the mount to fit the adapter, cut the bottom portion leaving the top intact. This maintains the most strength and provides a nice flat surface for the top of the adapter to rest against so it doesn't move. I didn't think of this until after the first side was done, but luckily got it right. So, your cut will look like a slightly upward cut(back to front) on the bottom, parallel to the top.
Laissez Les Bon Temps Rouler "Let the Good Times Roll"