elementsofnoise

I am selling these items from my 2007 C50T. It has a little less than 10,000 miles on it.

Pictures are attached of these items.

Factory Windshield and assembly with front turn signal bar and signals attached. Great Condition. The only thing different from stock on this is that the lenses on the turn signals are smoked.

Factory Studded Passenger Seat

Factory Rear Sissy Bar with Studded Pad (missing two studs)

Factory Studded Saddlebags with brackets and hardware.

Factory Studded Drivers Seat

Factory Exhaust System (baffles removed)

Make offers - shipping from Dallas

Attached Images

	photo[2].JPG (159.0 KB, 69 views)
	photo[3].JPG (110.8 KB, 42 views)

elementsofnoise

Due to the overwhelming response I got for these parts (sarcasm intended) from this forum I have sold them all already on Ebay.

Thanks

mdram

you get more responses if you incluse a price

oh and new posters with 1 or 2 posts and an add can be a red flag

__________________
03 Volusia
Cobra Streetrod Slashdown Exhaust (minus top tip), jet kit, light bar, highway bar, Switchblade 2-up

If you wanna know where the lower shore is, just head to the end of the earth and hang a left, 2 blocks over and your there

elementsofnoise

yeah I should have taken that into account. I am definitely a newbie on this forum. I did get quite a few views so I expected I would at least get an offer for something. Either way I have already found so much helpful info on this forum that has been great for me since I have only had my C50 less than a year.

Thanks for that advice for me selling something in the future and now I can at least say 1 got one reply. haha

mdram

no problem.
almost forgot though

pics help alot too

__________________
03 Volusia
Cobra Streetrod Slashdown Exhaust (minus top tip), jet kit, light bar, highway bar, Switchblade 2-up

If you wanna know where the lower shore is, just head to the end of the earth and hang a left, 2 blocks over and your there

elementsofnoise

I had posted pics of the stuff on the bike and figured if anyone showed any interest then I could easily send them individual pics of whatever they were interested in. Oh well, you live and you learn right?

Thanks again for the tips as I am sure I will have something to sell in the future. I am stripping my whole bike completely down for full powder coating, painting, cutting chopping/customizing things. There should be some more parts that I won't need anymore when it's all said and done.

TheRealMoleman

****, I just saw this, I would have been interested in the Factory Rear Sissy Bar with Studded Pad. How much did you end up selling it for?